Saturday, October 15, 2016

October Soap Challenge "Wood Grain Soap"


This month's Soap Challenge offered by Amy Worden of Great Cakes Soapworks is "Wood Grain  Soaps".  Here are the guidelines for this month's challenge:

The goal of this challenge is to get our soap to look like a natural wood grain.  The textures, colors, and feel of a piece of wood can vary from tree to tree, and the look of the wood will also change depending on the finishes and stains, or paint that is used on it.
Here are the Guidelines:
1. Your soap must be made with cold process only featuring a wood grain technique. (The outer bark of the tree may also be part of your design, but the main focus should be the inside grain.)

2. You may use any type of mold, size, or shape for your soap.

3. You may submit your entry in ONE of the two categories: all-natural or synthetic. In order to enter your soap in the all-natural category, it must not contain any synthetic ingredients. No fragrance oils, micas, pigments, oxides (including zinc oxide and titanium dioxide) or dyes. A list of ingredients as you would list them on the label will be required for all entries in the all-natural category. These may be listed in the caption or blog post that you link to, not on the entry itself.

4. The photo you submit should have cut soap(s) from ONE batch only. Lighting and color adjustments may be made to best represent what the soap looks like in real life, but editing photos to alter the appearance of the soap is strictly prohibited.

 
I thought this challenge would be a breeze to complete, boy was I wrong. I decided I would like to make a soap that looked like weathered wood and started searching for images on Google for pictures and found some good examples and decided on these two images as my inspiration.
 

 

 
 I wanted to do a spin swirl to try and mimic the wood texture. The colors I chose are a grey mica, titanium dioxide for the  white, and a teal mica. I mixed 2 different fragrances from Bramble Berry, Woodland Elves and  Vetyver.  After getting my soap to a very light trace, I mixed my colors and put them into the bottles, I mixed a light grey and a darker gray and wanted just a small amount of the white and teal for part of the design. Everything went really well at first, the soap stayed very fluid for the pour, but when I actually started turning the mold back and forth to get the wood texture look a bunch of soap spilled out over the top of the mold, what a mess that was. Well I got that cleaned up and then I pressed a wood grain texture mat onto the top of the soap in the mold. Well there was a bunch of air bubbles under the mat and no matter what I tried I could not get most of them smoothed out. When I unmolded the soap the air holes looked awful so when the soap was hard enough to handle I used my soap beveller and shaved off  the top of the soap, I love how it showed the wood type texture when I shaved away the air bubble marks.
 
 
Staring to pour the different colors.
 

 
Finishing up the pouring of the colors.
 

 
Getting ready to spin the soap in the mold.
 

 
Cut Soap Bars
 

 
Cut Soap Bars
 
 

 
Cut Soap Bars
 
 

 
 
 
 
Take a peak at Amy's web page HERE

15 comments:

  1. Beautiful work, Margo! I love the colours (they are some of my favourites). Congrats on a great submission and thanks so much for sharing your process :)

    ReplyDelete
    Replies
    1. Thank you for your kind remarks. I did enjoy the challenge, it was fun.

      Delete
  2. I really like your colors - I would not have thought of that combo - it looks great!
    I love Woodland Elves and I love Vetyver...what a great idea putting them together.
    RE: Mat...I have good success with the impression mat on the bottom of the mold. Sometimes I put one down when I'm not sure my plan will turn out - then at least I can use the bottom for the top.
    Sly

    ReplyDelete
    Replies
    1. I have used the mat on the bottom and also in a PVC pipe and it turned out well, I thought if it was on the bottom and I did the spin swirl it would not transfer properly to the mat. Well my plan on the mat on the top was a total fail and I should have put it on the bottom instead. Thank you for your suggestion I appreciate it.

      Delete
  3. Beautiful colors!! You definitely handled your adversity well - the final soap looks really great!

    ReplyDelete
    Replies
    1. Thank you Amy, I am really enjoying all the soap challenges.

      Delete
  4. Beautiful colors and swirl pattern, Margo! You did a wonderful job interpreting your inspiration photo!

    ReplyDelete
    Replies
    1. Thank you, sometimes I have ideas on how I want my colors to turn out and with soap it is not always easy to achieve. I was so happy that the colors worked as planned.

      Delete
  5. What a pretty choice of colors - I like that you did something different with the challenge. :)

    ReplyDelete
    Replies
    1. Thank you so much, I learned so much from each of the challenges.

      Delete
  6. I love the colors you used. They are so fun! You did a great job on your soap and I don't see a single bubble. LOL! You attacked them well.

    ReplyDelete
    Replies
    1. Thank you, I am so grateful to have a nice soap beveller, otherwise it would have been hard to shave the bubble marks off the soap.

      Delete
  7. Love your color choices!! So pretty :)

    ReplyDelete