Sunday, August 7, 2016

My adventures making the "Dancing Funnel" Soap Challenge.


This month's Soap Challenge offered by Amy Worden of Great Cakes Soapworks is called the  "Dancing Funnel".  This technique was introduced by Tatsiana Serko of Creative Soap by Steso.  She is so talented and I never get tired of looking  at all of her awesome creations. I am so grateful that she would share with us just how to make this soap design along with the helpful tips. Also I would like to thank Amy for all her information and the video  tutorial of her making the soap.

This technique requires that you have a very  fluid soap batter and it is recommended that we do not use our stick blender to bring the soap  to a light trace, and instead stir the soap enough to establish an emulsion so the oils and water/lye mixture will not separate.  I was very nervous that I would  not mix it long enough, and was not really sure just how the soap should look to ensure that it would not separate. 
The first batch I made is the one I feel that I was the most successful with. I am happy with the results and will submit for the Challenge. It is scented with Lavender fragrance oil from Bramble Berry. The color I used for the rim is a dark purple mica, the other two colors were a pink and a lavender mica (used the same purple as the rim and added some white mica to lighten it). 

 
My color choices.
 

Starting to add my colors in the mold. 


Almost done with the colors.


The finished soap in the mold.


Here it is unmolded and ready to cut into bars of soap.
I will plane the bars in a few days.


Here are some pictures of the bars of soap after they have been planed.






I tried 3 other soaps batches and had different results making each of them:
 Attempt #2 - I used "Almond" fragrance oil,  I added the fragrance to the oils before adding the lye as I did with batch #1 and started to stir it and within a few minutes the soap started to quickly get really thick. I hurried and separated out some of the soap and colored it white, and colored the rest yellow and globed it into the mold alternating colors and mixed it a bit to make a swirl and stuck it into the warm oven to gel. I did get some nice bars of soap so was happy with that, and they smell really nice.


Almond Scented soap bars.


Attempt #3 -  I used "Energy" fragrance oil. The colors I chose for this one was a red for the outer ring, black for one center color, and red for the other center color. At first everything was going great as I was making all the different colored centers,  then the colors seemed to be taking on a shape of their own, and that is when I noticed that the soap oils seemed to be seeping to the top of the soap and the colors were traveling away from the design. I decided to just add the rest of the colors try swirling the top layer that had seeped the oil and put it into the warm oven and see what happens. The oils did absorb back into the soap batter as it gelled....whew. I went ahead and planed the bottom part of the soaps just to see what the dancing funnel colors looked  like, and I could see that the colors were actually traveling away from the design. Looks like we have us some soap to use for our family, and it really smells awesome.


Color choices for the Energy Soap




Here is the beginning of adding the colors into the mold.



Here I gave up on trying to continue the rest of the dancing funnel pour 
and adding the rest of the soap colors to swirl.



Here is the swirled top ready to go into the warm oven 
to gel the soap.



On the left is the soap that I planed to see what the colors looked like,
and the right side picture is the other side of the soap where I swirled the top.


Attempt #4 - I used "Pearberry" fragrance oil. The colors I chose for this one was a Teal for the outer ring, White, Yellow and Orange for the different center colors. This time the soap stayed together for the entire pour and I decided to see how it would turn out if I did not gel the soap. I was a softer soap than the ones that I gelled and I had to wait longer to plane the tops but other than that all went well.  I am pleased how it turned out, the colors remind me of candy corn (except for the teal)......now that has me thinking of a possible soap to make if a vendor has that fragrance oil.



My color selection, for the white I use a mica instead of Titanium Dioxide.



Here is the soap just after finishing the pour.


Here are the cut & planed bars of the Pearberry soap. 













8 comments:

  1. Excellent work, Margo! I enjoyed reading about all four of your batches and the different issues you encountered - and how you solved them! The lavender soap is really lovely. The pink & purple color palette is so soft and feminine, and the circles are well-formed. It's amazing what a little bit of planing will do!

    ReplyDelete
    Replies
    1. Thanks Amy. I learned so much doing this challenge, and yes some of it was really a challenge for me. I am already envisioning all the color schemes I want to try.

      Delete
  2. Margo:
    Your first one is the best! I always love pink & purple.
    The Pearberry is a wonderful color pallet too!
    Sly

    ReplyDelete
    Replies
    1. Thank you so much. There are so many awesome submissions.

      Delete
  3. Margo,
    Thanks for sharing your journey! It is so helpful to read what worked and what didn't. I love your lavender soap.

    ReplyDelete
  4. Very pretty, all of them. The tutorial is well done and was interesting to read

    ReplyDelete
  5. Thank you for all the work you did to document each batch! I always learn so much from these challenges, especially from people like you who take the time to provide great information.

    I love every one of your soaps but your entry is especially beautiful. Not just because they are my favorite colors ;) but because the design is so perfect. The outline of the purple really made everything stand out. Great job!

    ReplyDelete
  6. Love your choice for the challenge and you had some great saves on the other batches!

    ReplyDelete